from plotly.basedatatypes import BaseTraceType as _BaseTraceType import copy as _copy class Waterfall(_BaseTraceType): # class properties # -------------------- _parent_path_str = "" _path_str = "waterfall" _valid_props = { "alignmentgroup", "base", "cliponaxis", "connector", "constraintext", "customdata", "customdatasrc", "decreasing", "dx", "dy", "hoverinfo", "hoverinfosrc", "hoverlabel", "hovertemplate", "hovertemplatesrc", "hovertext", "hovertextsrc", "ids", "idssrc", "increasing", "insidetextanchor", "insidetextfont", "legend", "legendgroup", "legendgrouptitle", "legendrank", "legendwidth", "measure", "measuresrc", "meta", "metasrc", "name", "offset", "offsetgroup", "offsetsrc", "opacity", "orientation", "outsidetextfont", "selectedpoints", "showlegend", "stream", "text", "textangle", "textfont", "textinfo", "textposition", "textpositionsrc", "textsrc", "texttemplate", "texttemplatesrc", "totals", "type", "uid", "uirevision", "visible", "width", "widthsrc", "x", "x0", "xaxis", "xhoverformat", "xperiod", "xperiod0", "xperiodalignment", "xsrc", "y", "y0", "yaxis", "yhoverformat", "yperiod", "yperiod0", "yperiodalignment", "ysrc", } # alignmentgroup # -------------- @property def alignmentgroup(self): """ Set several traces linked to the same position axis or matching axes to the same alignmentgroup. This controls whether bars compute their positional range dependently or independently. The 'alignmentgroup' property is a string and must be specified as: - A string - A number that will be converted to a string Returns ------- str """ return self["alignmentgroup"] @alignmentgroup.setter def alignmentgroup(self, val): self["alignmentgroup"] = val # base # ---- @property def base(self): """ Sets where the bar base is drawn (in position axis units). The 'base' property is a number and may be specified as: - An int or float Returns ------- int|float """ return self["base"] @base.setter def base(self, val): self["base"] = val # cliponaxis # ---------- @property def cliponaxis(self): """ Determines whether the text nodes are clipped about the subplot axes. To show the text nodes above axis lines and tick labels, make sure to set `xaxis.layer` and `yaxis.layer` to *below traces*. The 'cliponaxis' property must be specified as a bool (either True, or False) Returns ------- bool """ return self["cliponaxis"] @cliponaxis.setter def cliponaxis(self, val): self["cliponaxis"] = val # connector # --------- @property def connector(self): """ The 'connector' property is an instance of Connector that may be specified as: - An instance of :class:`plotly.graph_objs.waterfall.Connector` - A dict of string/value properties that will be passed to the Connector constructor Supported dict properties: line :class:`plotly.graph_objects.waterfall.connecto r.Line` instance or dict with compatible properties mode Sets the shape of connector lines. visible Determines if connector lines are drawn. Returns ------- plotly.graph_objs.waterfall.Connector """ return self["connector"] @connector.setter def connector(self, val): self["connector"] = val # constraintext # ------------- @property def constraintext(self): """ Constrain the size of text inside or outside a bar to be no larger than the bar itself. The 'constraintext' property is an enumeration that may be specified as: - One of the following enumeration values: ['inside', 'outside', 'both', 'none'] Returns ------- Any """ return self["constraintext"] @constraintext.setter def constraintext(self, val): self["constraintext"] = val # customdata # ---------- @property def customdata(self): """ Assigns extra data each datum. This may be useful when listening to hover, click and selection events. Note that, "scatter" traces also appends customdata items in the markers DOM elements The 'customdata' property is an array that may be specified as a tuple, list, numpy array, or pandas Series Returns ------- numpy.ndarray """ return self["customdata"] @customdata.setter def customdata(self, val): self["customdata"] = val # customdatasrc # ------------- @property def customdatasrc(self): """ Sets the source reference on Chart Studio Cloud for `customdata`. The 'customdatasrc' property must be specified as a string or as a plotly.grid_objs.Column object Returns ------- str """ return self["customdatasrc"] @customdatasrc.setter def customdatasrc(self, val): self["customdatasrc"] = val # decreasing # ---------- @property def decreasing(self): """ The 'decreasing' property is an instance of Decreasing that may be specified as: - An instance of :class:`plotly.graph_objs.waterfall.Decreasing` - A dict of string/value properties that will be passed to the Decreasing constructor Supported dict properties: marker :class:`plotly.graph_objects.waterfall.decreasi ng.Marker` instance or dict with compatible properties Returns ------- plotly.graph_objs.waterfall.Decreasing """ return self["decreasing"] @decreasing.setter def decreasing(self, val): self["decreasing"] = val # dx # -- @property def dx(self): """ Sets the x coordinate step. See `x0` for more info. The 'dx' property is a number and may be specified as: - An int or float Returns ------- int|float """ return self["dx"] @dx.setter def dx(self, val): self["dx"] = val # dy # -- @property def dy(self): """ Sets the y coordinate step. See `y0` for more info. The 'dy' property is a number and may be specified as: - An int or float Returns ------- int|float """ return self["dy"] @dy.setter def dy(self, val): self["dy"] = val # hoverinfo # --------- @property def hoverinfo(self): """ Determines which trace information appear on hover. If `none` or `skip` are set, no information is displayed upon hovering. But, if `none` is set, click and hover events are still fired. The 'hoverinfo' property is a flaglist and may be specified as a string containing: - Any combination of ['name', 'x', 'y', 'text', 'initial', 'delta', 'final'] joined with '+' characters (e.g. 'name+x') OR exactly one of ['all', 'none', 'skip'] (e.g. 'skip') - A list or array of the above Returns ------- Any|numpy.ndarray """ return self["hoverinfo"] @hoverinfo.setter def hoverinfo(self, val): self["hoverinfo"] = val # hoverinfosrc # ------------ @property def hoverinfosrc(self): """ Sets the source reference on Chart Studio Cloud for `hoverinfo`. The 'hoverinfosrc' property must be specified as a string or as a plotly.grid_objs.Column object Returns ------- str """ return self["hoverinfosrc"] @hoverinfosrc.setter def hoverinfosrc(self, val): self["hoverinfosrc"] = val # hoverlabel # ---------- @property def hoverlabel(self): """ The 'hoverlabel' property is an instance of Hoverlabel that may be specified as: - An instance of :class:`plotly.graph_objs.waterfall.Hoverlabel` - A dict of string/value properties that will be passed to the Hoverlabel constructor Supported dict properties: align Sets the horizontal alignment of the text content within hover label box. Has an effect only if the hover label text spans more two or more lines alignsrc Sets the source reference on Chart Studio Cloud for `align`. bgcolor Sets the background color of the hover labels for this trace bgcolorsrc Sets the source reference on Chart Studio Cloud for `bgcolor`. bordercolor Sets the border color of the hover labels for this trace. bordercolorsrc Sets the source reference on Chart Studio Cloud for `bordercolor`. font Sets the font used in hover labels. namelength Sets the default length (in number of characters) of the trace name in the hover labels for all traces. -1 shows the whole name regardless of length. 0-3 shows the first 0-3 characters, and an integer >3 will show the whole name if it is less than that many characters, but if it is longer, will truncate to `namelength - 3` characters and add an ellipsis. namelengthsrc Sets the source reference on Chart Studio Cloud for `namelength`. Returns ------- plotly.graph_objs.waterfall.Hoverlabel """ return self["hoverlabel"] @hoverlabel.setter def hoverlabel(self, val): self["hoverlabel"] = val # hovertemplate # ------------- @property def hovertemplate(self): """ Template string used for rendering the information that appear on hover box. Note that this will override `hoverinfo`. Variables are inserted using %{variable}, for example "y: %{y}" as well as %{xother}, {%_xother}, {%_xother_}, {%xother_}. When showing info for several points, "xother" will be added to those with different x positions from the first point. An underscore before or after "(x|y)other" will add a space on that side, only when this field is shown. Numbers are formatted using d3-format's syntax %{variable:d3-format}, for example "Price: %{y:$.2f}". https://github.com/d3/d3-format/tree/v1.4.5#d3-format for details on the formatting syntax. Dates are formatted using d3-time-format's syntax %{variable|d3-time-format}, for example "Day: %{2019-01-01|%A}". https://github.com/d3/d3-time- format/tree/v2.2.3#locale_format for details on the date formatting syntax. The variables available in `hovertemplate` are the ones emitted as event data described at this link https://plotly.com/javascript/plotlyjs-events/#event-data. Additionally, every attributes that can be specified per-point (the ones that are `arrayOk: true`) are available. Finally, the template string has access to variables `initial`, `delta` and `final`. Anything contained in tag `` is displayed in the secondary box, for example "{fullData.name}". To hide the secondary box completely, use an empty tag ``. The 'hovertemplate' property is a string and must be specified as: - A string - A number that will be converted to a string - A tuple, list, or one-dimensional numpy array of the above Returns ------- str|numpy.ndarray """ return self["hovertemplate"] @hovertemplate.setter def hovertemplate(self, val): self["hovertemplate"] = val # hovertemplatesrc # ---------------- @property def hovertemplatesrc(self): """ Sets the source reference on Chart Studio Cloud for `hovertemplate`. The 'hovertemplatesrc' property must be specified as a string or as a plotly.grid_objs.Column object Returns ------- str """ return self["hovertemplatesrc"] @hovertemplatesrc.setter def hovertemplatesrc(self, val): self["hovertemplatesrc"] = val # hovertext # --------- @property def hovertext(self): """ Sets hover text elements associated with each (x,y) pair. If a single string, the same string appears over all the data points. If an array of string, the items are mapped in order to the this trace's (x,y) coordinates. To be seen, trace `hoverinfo` must contain a "text" flag. The 'hovertext' property is a string and must be specified as: - A string - A number that will be converted to a string - A tuple, list, or one-dimensional numpy array of the above Returns ------- str|numpy.ndarray """ return self["hovertext"] @hovertext.setter def hovertext(self, val): self["hovertext"] = val # hovertextsrc # ------------ @property def hovertextsrc(self): """ Sets the source reference on Chart Studio Cloud for `hovertext`. The 'hovertextsrc' property must be specified as a string or as a plotly.grid_objs.Column object Returns ------- str """ return self["hovertextsrc"] @hovertextsrc.setter def hovertextsrc(self, val): self["hovertextsrc"] = val # ids # --- @property def ids(self): """ Assigns id labels to each datum. These ids for object constancy of data points during animation. Should be an array of strings, not numbers or any other type. The 'ids' property is an array that may be specified as a tuple, list, numpy array, or pandas Series Returns ------- numpy.ndarray """ return self["ids"] @ids.setter def ids(self, val): self["ids"] = val # idssrc # ------ @property def idssrc(self): """ Sets the source reference on Chart Studio Cloud for `ids`. The 'idssrc' property must be specified as a string or as a plotly.grid_objs.Column object Returns ------- str """ return self["idssrc"] @idssrc.setter def idssrc(self, val): self["idssrc"] = val # increasing # ---------- @property def increasing(self): """ The 'increasing' property is an instance of Increasing that may be specified as: - An instance of :class:`plotly.graph_objs.waterfall.Increasing` - A dict of string/value properties that will be passed to the Increasing constructor Supported dict properties: marker :class:`plotly.graph_objects.waterfall.increasi ng.Marker` instance or dict with compatible properties Returns ------- plotly.graph_objs.waterfall.Increasing """ return self["increasing"] @increasing.setter def increasing(self, val): self["increasing"] = val # insidetextanchor # ---------------- @property def insidetextanchor(self): """ Determines if texts are kept at center or start/end points in `textposition` "inside" mode. The 'insidetextanchor' property is an enumeration that may be specified as: - One of the following enumeration values: ['end', 'middle', 'start'] Returns ------- Any """ return self["insidetextanchor"] @insidetextanchor.setter def insidetextanchor(self, val): self["insidetextanchor"] = val # insidetextfont # -------------- @property def insidetextfont(self): """ Sets the font used for `text` lying inside the bar. The 'insidetextfont' property is an instance of Insidetextfont that may be specified as: - An instance of :class:`plotly.graph_objs.waterfall.Insidetextfont` - A dict of string/value properties that will be passed to the Insidetextfont constructor Supported dict properties: color colorsrc Sets the source reference on Chart Studio Cloud for `color`. family HTML font family - the typeface that will be applied by the web browser. The web browser will only be able to apply a font if it is available on the system which it operates. Provide multiple font families, separated by commas, to indicate the preference in which to apply fonts if they aren't available on the system. The Chart Studio Cloud (at https://chart-studio.plotly.com or on-premise) generates images on a server, where only a select number of fonts are installed and supported. These include "Arial", "Balto", "Courier New", "Droid Sans",, "Droid Serif", "Droid Sans Mono", "Gravitas One", "Old Standard TT", "Open Sans", "Overpass", "PT Sans Narrow", "Raleway", "Times New Roman". familysrc Sets the source reference on Chart Studio Cloud for `family`. size sizesrc Sets the source reference on Chart Studio Cloud for `size`. Returns ------- plotly.graph_objs.waterfall.Insidetextfont """ return self["insidetextfont"] @insidetextfont.setter def insidetextfont(self, val): self["insidetextfont"] = val # legend # ------ @property def legend(self): """ Sets the reference to a legend to show this trace in. References to these legends are "legend", "legend2", "legend3", etc. Settings for these legends are set in the layout, under `layout.legend`, `layout.legend2`, etc. The 'legend' property is an identifier of a particular subplot, of type 'legend', that may be specified as the string 'legend' optionally followed by an integer >= 1 (e.g. 'legend', 'legend1', 'legend2', 'legend3', etc.) Returns ------- str """ return self["legend"] @legend.setter def legend(self, val): self["legend"] = val # legendgroup # ----------- @property def legendgroup(self): """ Sets the legend group for this trace. Traces and shapes part of the same legend group hide/show at the same time when toggling legend items. The 'legendgroup' property is a string and must be specified as: - A string - A number that will be converted to a string Returns ------- str """ return self["legendgroup"] @legendgroup.setter def legendgroup(self, val): self["legendgroup"] = val # legendgrouptitle # ---------------- @property def legendgrouptitle(self): """ The 'legendgrouptitle' property is an instance of Legendgrouptitle that may be specified as: - An instance of :class:`plotly.graph_objs.waterfall.Legendgrouptitle` - A dict of string/value properties that will be passed to the Legendgrouptitle constructor Supported dict properties: font Sets this legend group's title font. text Sets the title of the legend group. Returns ------- plotly.graph_objs.waterfall.Legendgrouptitle """ return self["legendgrouptitle"] @legendgrouptitle.setter def legendgrouptitle(self, val): self["legendgrouptitle"] = val # legendrank # ---------- @property def legendrank(self): """ Sets the legend rank for this trace. Items and groups with smaller ranks are presented on top/left side while with "reversed" `legend.traceorder` they are on bottom/right side. The default legendrank is 1000, so that you can use ranks less than 1000 to place certain items before all unranked items, and ranks greater than 1000 to go after all unranked items. When having unranked or equal rank items shapes would be displayed after traces i.e. according to their order in data and layout. The 'legendrank' property is a number and may be specified as: - An int or float Returns ------- int|float """ return self["legendrank"] @legendrank.setter def legendrank(self, val): self["legendrank"] = val # legendwidth # ----------- @property def legendwidth(self): """ Sets the width (in px or fraction) of the legend for this trace. The 'legendwidth' property is a number and may be specified as: - An int or float in the interval [0, inf] Returns ------- int|float """ return self["legendwidth"] @legendwidth.setter def legendwidth(self, val): self["legendwidth"] = val # measure # ------- @property def measure(self): """ An array containing types of values. By default the values are considered as 'relative'. However; it is possible to use 'total' to compute the sums. Also 'absolute' could be applied to reset the computed total or to declare an initial value where needed. The 'measure' property is an array that may be specified as a tuple, list, numpy array, or pandas Series Returns ------- numpy.ndarray """ return self["measure"] @measure.setter def measure(self, val): self["measure"] = val # measuresrc # ---------- @property def measuresrc(self): """ Sets the source reference on Chart Studio Cloud for `measure`. The 'measuresrc' property must be specified as a string or as a plotly.grid_objs.Column object Returns ------- str """ return self["measuresrc"] @measuresrc.setter def measuresrc(self, val): self["measuresrc"] = val # meta # ---- @property def meta(self): """ Assigns extra meta information associated with this trace that can be used in various text attributes. Attributes such as trace `name`, graph, axis and colorbar `title.text`, annotation `text` `rangeselector`, `updatemenues` and `sliders` `label` text all support `meta`. To access the trace `meta` values in an attribute in the same trace, simply use `%{meta[i]}` where `i` is the index or key of the `meta` item in question. To access trace `meta` in layout attributes, use `%{data[n[.meta[i]}` where `i` is the index or key of the `meta` and `n` is the trace index. The 'meta' property accepts values of any type Returns ------- Any|numpy.ndarray """ return self["meta"] @meta.setter def meta(self, val): self["meta"] = val # metasrc # ------- @property def metasrc(self): """ Sets the source reference on Chart Studio Cloud for `meta`. The 'metasrc' property must be specified as a string or as a plotly.grid_objs.Column object Returns ------- str """ return self["metasrc"] @metasrc.setter def metasrc(self, val): self["metasrc"] = val # name # ---- @property def name(self): """ Sets the trace name. The trace name appears as the legend item and on hover. The 'name' property is a string and must be specified as: - A string - A number that will be converted to a string Returns ------- str """ return self["name"] @name.setter def name(self, val): self["name"] = val # offset # ------ @property def offset(self): """ Shifts the position where the bar is drawn (in position axis units). In "group" barmode, traces that set "offset" will be excluded and drawn in "overlay" mode instead. The 'offset' property is a number and may be specified as: - An int or float - A tuple, list, or one-dimensional numpy array of the above Returns ------- int|float|numpy.ndarray """ return self["offset"] @offset.setter def offset(self, val): self["offset"] = val # offsetgroup # ----------- @property def offsetgroup(self): """ Set several traces linked to the same position axis or matching axes to the same offsetgroup where bars of the same position coordinate will line up. The 'offsetgroup' property is a string and must be specified as: - A string - A number that will be converted to a string Returns ------- str """ return self["offsetgroup"] @offsetgroup.setter def offsetgroup(self, val): self["offsetgroup"] = val # offsetsrc # --------- @property def offsetsrc(self): """ Sets the source reference on Chart Studio Cloud for `offset`. The 'offsetsrc' property must be specified as a string or as a plotly.grid_objs.Column object Returns ------- str """ return self["offsetsrc"] @offsetsrc.setter def offsetsrc(self, val): self["offsetsrc"] = val # opacity # ------- @property def opacity(self): """ Sets the opacity of the trace. The 'opacity' property is a number and may be specified as: - An int or float in the interval [0, 1] Returns ------- int|float """ return self["opacity"] @opacity.setter def opacity(self, val): self["opacity"] = val # orientation # ----------- @property def orientation(self): """ Sets the orientation of the bars. With "v" ("h"), the value of the each bar spans along the vertical (horizontal). The 'orientation' property is an enumeration that may be specified as: - One of the following enumeration values: ['v', 'h'] Returns ------- Any """ return self["orientation"] @orientation.setter def orientation(self, val): self["orientation"] = val # outsidetextfont # --------------- @property def outsidetextfont(self): """ Sets the font used for `text` lying outside the bar. The 'outsidetextfont' property is an instance of Outsidetextfont that may be specified as: - An instance of :class:`plotly.graph_objs.waterfall.Outsidetextfont` - A dict of string/value properties that will be passed to the Outsidetextfont constructor Supported dict properties: color colorsrc Sets the source reference on Chart Studio Cloud for `color`. family HTML font family - the typeface that will be applied by the web browser. The web browser will only be able to apply a font if it is available on the system which it operates. Provide multiple font families, separated by commas, to indicate the preference in which to apply fonts if they aren't available on the system. The Chart Studio Cloud (at https://chart-studio.plotly.com or on-premise) generates images on a server, where only a select number of fonts are installed and supported. These include "Arial", "Balto", "Courier New", "Droid Sans",, "Droid Serif", "Droid Sans Mono", "Gravitas One", "Old Standard TT", "Open Sans", "Overpass", "PT Sans Narrow", "Raleway", "Times New Roman". familysrc Sets the source reference on Chart Studio Cloud for `family`. size sizesrc Sets the source reference on Chart Studio Cloud for `size`. Returns ------- plotly.graph_objs.waterfall.Outsidetextfont """ return self["outsidetextfont"] @outsidetextfont.setter def outsidetextfont(self, val): self["outsidetextfont"] = val # selectedpoints # -------------- @property def selectedpoints(self): """ Array containing integer indices of selected points. Has an effect only for traces that support selections. Note that an empty array means an empty selection where the `unselected` are turned on for all points, whereas, any other non-array values means no selection all where the `selected` and `unselected` styles have no effect. The 'selectedpoints' property accepts values of any type Returns ------- Any """ return self["selectedpoints"] @selectedpoints.setter def selectedpoints(self, val): self["selectedpoints"] = val # showlegend # ---------- @property def showlegend(self): """ Determines whether or not an item corresponding to this trace is shown in the legend. The 'showlegend' property must be specified as a bool (either True, or False) Returns ------- bool """ return self["showlegend"] @showlegend.setter def showlegend(self, val): self["showlegend"] = val # stream # ------ @property def stream(self): """ The 'stream' property is an instance of Stream that may be specified as: - An instance of :class:`plotly.graph_objs.waterfall.Stream` - A dict of string/value properties that will be passed to the Stream constructor Supported dict properties: maxpoints Sets the maximum number of points to keep on the plots from an incoming stream. If `maxpoints` is set to 50, only the newest 50 points will be displayed on the plot. token The stream id number links a data trace on a plot with a stream. See https://chart- studio.plotly.com/settings for more details. Returns ------- plotly.graph_objs.waterfall.Stream """ return self["stream"] @stream.setter def stream(self, val): self["stream"] = val # text # ---- @property def text(self): """ Sets text elements associated with each (x,y) pair. If a single string, the same string appears over all the data points. If an array of string, the items are mapped in order to the this trace's (x,y) coordinates. If trace `hoverinfo` contains a "text" flag and "hovertext" is not set, these elements will be seen in the hover labels. The 'text' property is a string and must be specified as: - A string - A number that will be converted to a string - A tuple, list, or one-dimensional numpy array of the above Returns ------- str|numpy.ndarray """ return self["text"] @text.setter def text(self, val): self["text"] = val # textangle # --------- @property def textangle(self): """ Sets the angle of the tick labels with respect to the bar. For example, a `tickangle` of -90 draws the tick labels vertically. With "auto" the texts may automatically be rotated to fit with the maximum size in bars. The 'textangle' property is a angle (in degrees) that may be specified as a number between -180 and 180. Numeric values outside this range are converted to the equivalent value (e.g. 270 is converted to -90). Returns ------- int|float """ return self["textangle"] @textangle.setter def textangle(self, val): self["textangle"] = val # textfont # -------- @property def textfont(self): """ Sets the font used for `text`. The 'textfont' property is an instance of Textfont that may be specified as: - An instance of :class:`plotly.graph_objs.waterfall.Textfont` - A dict of string/value properties that will be passed to the Textfont constructor Supported dict properties: color colorsrc Sets the source reference on Chart Studio Cloud for `color`. family HTML font family - the typeface that will be applied by the web browser. The web browser will only be able to apply a font if it is available on the system which it operates. Provide multiple font families, separated by commas, to indicate the preference in which to apply fonts if they aren't available on the system. The Chart Studio Cloud (at https://chart-studio.plotly.com or on-premise) generates images on a server, where only a select number of fonts are installed and supported. These include "Arial", "Balto", "Courier New", "Droid Sans",, "Droid Serif", "Droid Sans Mono", "Gravitas One", "Old Standard TT", "Open Sans", "Overpass", "PT Sans Narrow", "Raleway", "Times New Roman". familysrc Sets the source reference on Chart Studio Cloud for `family`. size sizesrc Sets the source reference on Chart Studio Cloud for `size`. Returns ------- plotly.graph_objs.waterfall.Textfont """ return self["textfont"] @textfont.setter def textfont(self, val): self["textfont"] = val # textinfo # -------- @property def textinfo(self): """ Determines which trace information appear on the graph. In the case of having multiple waterfalls, totals are computed separately (per trace). The 'textinfo' property is a flaglist and may be specified as a string containing: - Any combination of ['label', 'text', 'initial', 'delta', 'final'] joined with '+' characters (e.g. 'label+text') OR exactly one of ['none'] (e.g. 'none') Returns ------- Any """ return self["textinfo"] @textinfo.setter def textinfo(self, val): self["textinfo"] = val # textposition # ------------ @property def textposition(self): """ Specifies the location of the `text`. "inside" positions `text` inside, next to the bar end (rotated and scaled if needed). "outside" positions `text` outside, next to the bar end (scaled if needed), unless there is another bar stacked on this one, then the text gets pushed inside. "auto" tries to position `text` inside the bar, but if the bar is too small and no bar is stacked on this one the text is moved outside. If "none", no text appears. The 'textposition' property is an enumeration that may be specified as: - One of the following enumeration values: ['inside', 'outside', 'auto', 'none'] - A tuple, list, or one-dimensional numpy array of the above Returns ------- Any|numpy.ndarray """ return self["textposition"] @textposition.setter def textposition(self, val): self["textposition"] = val # textpositionsrc # --------------- @property def textpositionsrc(self): """ Sets the source reference on Chart Studio Cloud for `textposition`. The 'textpositionsrc' property must be specified as a string or as a plotly.grid_objs.Column object Returns ------- str """ return self["textpositionsrc"] @textpositionsrc.setter def textpositionsrc(self, val): self["textpositionsrc"] = val # textsrc # ------- @property def textsrc(self): """ Sets the source reference on Chart Studio Cloud for `text`. The 'textsrc' property must be specified as a string or as a plotly.grid_objs.Column object Returns ------- str """ return self["textsrc"] @textsrc.setter def textsrc(self, val): self["textsrc"] = val # texttemplate # ------------ @property def texttemplate(self): """ Template string used for rendering the information text that appear on points. Note that this will override `textinfo`. Variables are inserted using %{variable}, for example "y: %{y}". Numbers are formatted using d3-format's syntax %{variable:d3-format}, for example "Price: %{y:$.2f}". https://github.com/d3/d3-format/tree/v1.4.5#d3-format for details on the formatting syntax. Dates are formatted using d3-time-format's syntax %{variable|d3-time-format}, for example "Day: %{2019-01-01|%A}". https://github.com/d3/d3-time- format/tree/v2.2.3#locale_format for details on the date formatting syntax. Every attributes that can be specified per- point (the ones that are `arrayOk: true`) are available. Finally, the template string has access to variables `initial`, `delta`, `final` and `label`. The 'texttemplate' property is a string and must be specified as: - A string - A number that will be converted to a string - A tuple, list, or one-dimensional numpy array of the above Returns ------- str|numpy.ndarray """ return self["texttemplate"] @texttemplate.setter def texttemplate(self, val): self["texttemplate"] = val # texttemplatesrc # --------------- @property def texttemplatesrc(self): """ Sets the source reference on Chart Studio Cloud for `texttemplate`. The 'texttemplatesrc' property must be specified as a string or as a plotly.grid_objs.Column object Returns ------- str """ return self["texttemplatesrc"] @texttemplatesrc.setter def texttemplatesrc(self, val): self["texttemplatesrc"] = val # totals # ------ @property def totals(self): """ The 'totals' property is an instance of Totals that may be specified as: - An instance of :class:`plotly.graph_objs.waterfall.Totals` - A dict of string/value properties that will be passed to the Totals constructor Supported dict properties: marker :class:`plotly.graph_objects.waterfall.totals.M arker` instance or dict with compatible properties Returns ------- plotly.graph_objs.waterfall.Totals """ return self["totals"] @totals.setter def totals(self, val): self["totals"] = val # uid # --- @property def uid(self): """ Assign an id to this trace, Use this to provide object constancy between traces during animations and transitions. The 'uid' property is a string and must be specified as: - A string - A number that will be converted to a string Returns ------- str """ return self["uid"] @uid.setter def uid(self, val): self["uid"] = val # uirevision # ---------- @property def uirevision(self): """ Controls persistence of some user-driven changes to the trace: `constraintrange` in `parcoords` traces, as well as some `editable: true` modifications such as `name` and `colorbar.title`. Defaults to `layout.uirevision`. Note that other user-driven trace attribute changes are controlled by `layout` attributes: `trace.visible` is controlled by `layout.legend.uirevision`, `selectedpoints` is controlled by `layout.selectionrevision`, and `colorbar.(x|y)` (accessible with `config: {editable: true}`) is controlled by `layout.editrevision`. Trace changes are tracked by `uid`, which only falls back on trace index if no `uid` is provided. So if your app can add/remove traces before the end of the `data` array, such that the same trace has a different index, you can still preserve user-driven changes if you give each trace a `uid` that stays with it as it moves. The 'uirevision' property accepts values of any type Returns ------- Any """ return self["uirevision"] @uirevision.setter def uirevision(self, val): self["uirevision"] = val # visible # ------- @property def visible(self): """ Determines whether or not this trace is visible. If "legendonly", the trace is not drawn, but can appear as a legend item (provided that the legend itself is visible). The 'visible' property is an enumeration that may be specified as: - One of the following enumeration values: [True, False, 'legendonly'] Returns ------- Any """ return self["visible"] @visible.setter def visible(self, val): self["visible"] = val # width # ----- @property def width(self): """ Sets the bar width (in position axis units). The 'width' property is a number and may be specified as: - An int or float in the interval [0, inf] - A tuple, list, or one-dimensional numpy array of the above Returns ------- int|float|numpy.ndarray """ return self["width"] @width.setter def width(self, val): self["width"] = val # widthsrc # -------- @property def widthsrc(self): """ Sets the source reference on Chart Studio Cloud for `width`. The 'widthsrc' property must be specified as a string or as a plotly.grid_objs.Column object Returns ------- str """ return self["widthsrc"] @widthsrc.setter def widthsrc(self, val): self["widthsrc"] = val # x # - @property def x(self): """ Sets the x coordinates. The 'x' property is an array that may be specified as a tuple, list, numpy array, or pandas Series Returns ------- numpy.ndarray """ return self["x"] @x.setter def x(self, val): self["x"] = val # x0 # -- @property def x0(self): """ Alternate to `x`. Builds a linear space of x coordinates. Use with `dx` where `x0` is the starting coordinate and `dx` the step. The 'x0' property accepts values of any type Returns ------- Any """ return self["x0"] @x0.setter def x0(self, val): self["x0"] = val # xaxis # ----- @property def xaxis(self): """ Sets a reference between this trace's x coordinates and a 2D cartesian x axis. If "x" (the default value), the x coordinates refer to `layout.xaxis`. If "x2", the x coordinates refer to `layout.xaxis2`, and so on. The 'xaxis' property is an identifier of a particular subplot, of type 'x', that may be specified as the string 'x' optionally followed by an integer >= 1 (e.g. 'x', 'x1', 'x2', 'x3', etc.) Returns ------- str """ return self["xaxis"] @xaxis.setter def xaxis(self, val): self["xaxis"] = val # xhoverformat # ------------ @property def xhoverformat(self): """ Sets the hover text formatting rulefor `x` using d3 formatting mini-languages which are very similar to those in Python. For numbers, see: https://github.com/d3/d3-format/tree/v1.4.5#d3-format. And for dates see: https://github.com/d3/d3-time- format/tree/v2.2.3#locale_format. We add two items to d3's date formatter: "%h" for half of the year as a decimal number as well as "%{n}f" for fractional seconds with n digits. For example, *2016-10-13 09:15:23.456* with tickformat "%H~%M~%S.%2f" would display *09~15~23.46*By default the values are formatted using `xaxis.hoverformat`. The 'xhoverformat' property is a string and must be specified as: - A string - A number that will be converted to a string Returns ------- str """ return self["xhoverformat"] @xhoverformat.setter def xhoverformat(self, val): self["xhoverformat"] = val # xperiod # ------- @property def xperiod(self): """ Only relevant when the axis `type` is "date". Sets the period positioning in milliseconds or "M" on the x axis. Special values in the form of "M" could be used to declare the number of months. In this case `n` must be a positive integer. The 'xperiod' property accepts values of any type Returns ------- Any """ return self["xperiod"] @xperiod.setter def xperiod(self, val): self["xperiod"] = val # xperiod0 # -------- @property def xperiod0(self): """ Only relevant when the axis `type` is "date". Sets the base for period positioning in milliseconds or date string on the x0 axis. When `x0period` is round number of weeks, the `x0period0` by default would be on a Sunday i.e. 2000-01-02, otherwise it would be at 2000-01-01. The 'xperiod0' property accepts values of any type Returns ------- Any """ return self["xperiod0"] @xperiod0.setter def xperiod0(self, val): self["xperiod0"] = val # xperiodalignment # ---------------- @property def xperiodalignment(self): """ Only relevant when the axis `type` is "date". Sets the alignment of data points on the x axis. The 'xperiodalignment' property is an enumeration that may be specified as: - One of the following enumeration values: ['start', 'middle', 'end'] Returns ------- Any """ return self["xperiodalignment"] @xperiodalignment.setter def xperiodalignment(self, val): self["xperiodalignment"] = val # xsrc # ---- @property def xsrc(self): """ Sets the source reference on Chart Studio Cloud for `x`. The 'xsrc' property must be specified as a string or as a plotly.grid_objs.Column object Returns ------- str """ return self["xsrc"] @xsrc.setter def xsrc(self, val): self["xsrc"] = val # y # - @property def y(self): """ Sets the y coordinates. The 'y' property is an array that may be specified as a tuple, list, numpy array, or pandas Series Returns ------- numpy.ndarray """ return self["y"] @y.setter def y(self, val): self["y"] = val # y0 # -- @property def y0(self): """ Alternate to `y`. Builds a linear space of y coordinates. Use with `dy` where `y0` is the starting coordinate and `dy` the step. The 'y0' property accepts values of any type Returns ------- Any """ return self["y0"] @y0.setter def y0(self, val): self["y0"] = val # yaxis # ----- @property def yaxis(self): """ Sets a reference between this trace's y coordinates and a 2D cartesian y axis. If "y" (the default value), the y coordinates refer to `layout.yaxis`. If "y2", the y coordinates refer to `layout.yaxis2`, and so on. The 'yaxis' property is an identifier of a particular subplot, of type 'y', that may be specified as the string 'y' optionally followed by an integer >= 1 (e.g. 'y', 'y1', 'y2', 'y3', etc.) Returns ------- str """ return self["yaxis"] @yaxis.setter def yaxis(self, val): self["yaxis"] = val # yhoverformat # ------------ @property def yhoverformat(self): """ Sets the hover text formatting rulefor `y` using d3 formatting mini-languages which are very similar to those in Python. For numbers, see: https://github.com/d3/d3-format/tree/v1.4.5#d3-format. And for dates see: https://github.com/d3/d3-time- format/tree/v2.2.3#locale_format. We add two items to d3's date formatter: "%h" for half of the year as a decimal number as well as "%{n}f" for fractional seconds with n digits. For example, *2016-10-13 09:15:23.456* with tickformat "%H~%M~%S.%2f" would display *09~15~23.46*By default the values are formatted using `yaxis.hoverformat`. The 'yhoverformat' property is a string and must be specified as: - A string - A number that will be converted to a string Returns ------- str """ return self["yhoverformat"] @yhoverformat.setter def yhoverformat(self, val): self["yhoverformat"] = val # yperiod # ------- @property def yperiod(self): """ Only relevant when the axis `type` is "date". Sets the period positioning in milliseconds or "M" on the y axis. Special values in the form of "M" could be used to declare the number of months. In this case `n` must be a positive integer. The 'yperiod' property accepts values of any type Returns ------- Any """ return self["yperiod"] @yperiod.setter def yperiod(self, val): self["yperiod"] = val # yperiod0 # -------- @property def yperiod0(self): """ Only relevant when the axis `type` is "date". Sets the base for period positioning in milliseconds or date string on the y0 axis. When `y0period` is round number of weeks, the `y0period0` by default would be on a Sunday i.e. 2000-01-02, otherwise it would be at 2000-01-01. The 'yperiod0' property accepts values of any type Returns ------- Any """ return self["yperiod0"] @yperiod0.setter def yperiod0(self, val): self["yperiod0"] = val # yperiodalignment # ---------------- @property def yperiodalignment(self): """ Only relevant when the axis `type` is "date". Sets the alignment of data points on the y axis. The 'yperiodalignment' property is an enumeration that may be specified as: - One of the following enumeration values: ['start', 'middle', 'end'] Returns ------- Any """ return self["yperiodalignment"] @yperiodalignment.setter def yperiodalignment(self, val): self["yperiodalignment"] = val # ysrc # ---- @property def ysrc(self): """ Sets the source reference on Chart Studio Cloud for `y`. The 'ysrc' property must be specified as a string or as a plotly.grid_objs.Column object Returns ------- str """ return self["ysrc"] @ysrc.setter def ysrc(self, val): self["ysrc"] = val # type # ---- @property def type(self): return self._props["type"] # Self properties description # --------------------------- @property def _prop_descriptions(self): return """\ alignmentgroup Set several traces linked to the same position axis or matching axes to the same alignmentgroup. This controls whether bars compute their positional range dependently or independently. base Sets where the bar base is drawn (in position axis units). cliponaxis Determines whether the text nodes are clipped about the subplot axes. To show the text nodes above axis lines and tick labels, make sure to set `xaxis.layer` and `yaxis.layer` to *below traces*. connector :class:`plotly.graph_objects.waterfall.Connector` instance or dict with compatible properties constraintext Constrain the size of text inside or outside a bar to be no larger than the bar itself. customdata Assigns extra data each datum. This may be useful when listening to hover, click and selection events. Note that, "scatter" traces also appends customdata items in the markers DOM elements customdatasrc Sets the source reference on Chart Studio Cloud for `customdata`. decreasing :class:`plotly.graph_objects.waterfall.Decreasing` instance or dict with compatible properties dx Sets the x coordinate step. See `x0` for more info. dy Sets the y coordinate step. See `y0` for more info. hoverinfo Determines which trace information appear on hover. If `none` or `skip` are set, no information is displayed upon hovering. But, if `none` is set, click and hover events are still fired. hoverinfosrc Sets the source reference on Chart Studio Cloud for `hoverinfo`. hoverlabel :class:`plotly.graph_objects.waterfall.Hoverlabel` instance or dict with compatible properties hovertemplate Template string used for rendering the information that appear on hover box. Note that this will override `hoverinfo`. Variables are inserted using %{variable}, for example "y: %{y}" as well as %{xother}, {%_xother}, {%_xother_}, {%xother_}. When showing info for several points, "xother" will be added to those with different x positions from the first point. An underscore before or after "(x|y)other" will add a space on that side, only when this field is shown. Numbers are formatted using d3-format's syntax %{variable:d3-format}, for example "Price: %{y:$.2f}". https://github.com/d3/d3-format/tree/v1.4.5#d3-format for details on the formatting syntax. Dates are formatted using d3-time-format's syntax %{variable|d3-time-format}, for example "Day: %{2019-01-01|%A}". https://github.com/d3/d3-time- format/tree/v2.2.3#locale_format for details on the date formatting syntax. The variables available in `hovertemplate` are the ones emitted as event data described at this link https://plotly.com/javascript/plotlyjs-events/#event- data. Additionally, every attributes that can be specified per-point (the ones that are `arrayOk: true`) are available. Finally, the template string has access to variables `initial`, `delta` and `final`. Anything contained in tag `` is displayed in the secondary box, for example "{fullData.name}". To hide the secondary box completely, use an empty tag ``. hovertemplatesrc Sets the source reference on Chart Studio Cloud for `hovertemplate`. hovertext Sets hover text elements associated with each (x,y) pair. If a single string, the same string appears over all the data points. If an array of string, the items are mapped in order to the this trace's (x,y) coordinates. To be seen, trace `hoverinfo` must contain a "text" flag. hovertextsrc Sets the source reference on Chart Studio Cloud for `hovertext`. ids Assigns id labels to each datum. These ids for object constancy of data points during animation. Should be an array of strings, not numbers or any other type. idssrc Sets the source reference on Chart Studio Cloud for `ids`. increasing :class:`plotly.graph_objects.waterfall.Increasing` instance or dict with compatible properties insidetextanchor Determines if texts are kept at center or start/end points in `textposition` "inside" mode. insidetextfont Sets the font used for `text` lying inside the bar. legend Sets the reference to a legend to show this trace in. References to these legends are "legend", "legend2", "legend3", etc. Settings for these legends are set in the layout, under `layout.legend`, `layout.legend2`, etc. legendgroup Sets the legend group for this trace. Traces and shapes part of the same legend group hide/show at the same time when toggling legend items. legendgrouptitle :class:`plotly.graph_objects.waterfall.Legendgrouptitle ` instance or dict with compatible properties legendrank Sets the legend rank for this trace. Items and groups with smaller ranks are presented on top/left side while with "reversed" `legend.traceorder` they are on bottom/right side. The default legendrank is 1000, so that you can use ranks less than 1000 to place certain items before all unranked items, and ranks greater than 1000 to go after all unranked items. When having unranked or equal rank items shapes would be displayed after traces i.e. according to their order in data and layout. legendwidth Sets the width (in px or fraction) of the legend for this trace. measure An array containing types of values. By default the values are considered as 'relative'. However; it is possible to use 'total' to compute the sums. Also 'absolute' could be applied to reset the computed total or to declare an initial value where needed. measuresrc Sets the source reference on Chart Studio Cloud for `measure`. meta Assigns extra meta information associated with this trace that can be used in various text attributes. Attributes such as trace `name`, graph, axis and colorbar `title.text`, annotation `text` `rangeselector`, `updatemenues` and `sliders` `label` text all support `meta`. To access the trace `meta` values in an attribute in the same trace, simply use `%{meta[i]}` where `i` is the index or key of the `meta` item in question. To access trace `meta` in layout attributes, use `%{data[n[.meta[i]}` where `i` is the index or key of the `meta` and `n` is the trace index. metasrc Sets the source reference on Chart Studio Cloud for `meta`. name Sets the trace name. The trace name appears as the legend item and on hover. offset Shifts the position where the bar is drawn (in position axis units). In "group" barmode, traces that set "offset" will be excluded and drawn in "overlay" mode instead. offsetgroup Set several traces linked to the same position axis or matching axes to the same offsetgroup where bars of the same position coordinate will line up. offsetsrc Sets the source reference on Chart Studio Cloud for `offset`. opacity Sets the opacity of the trace. orientation Sets the orientation of the bars. With "v" ("h"), the value of the each bar spans along the vertical (horizontal). outsidetextfont Sets the font used for `text` lying outside the bar. selectedpoints Array containing integer indices of selected points. Has an effect only for traces that support selections. Note that an empty array means an empty selection where the `unselected` are turned on for all points, whereas, any other non-array values means no selection all where the `selected` and `unselected` styles have no effect. showlegend Determines whether or not an item corresponding to this trace is shown in the legend. stream :class:`plotly.graph_objects.waterfall.Stream` instance or dict with compatible properties text Sets text elements associated with each (x,y) pair. If a single string, the same string appears over all the data points. If an array of string, the items are mapped in order to the this trace's (x,y) coordinates. If trace `hoverinfo` contains a "text" flag and "hovertext" is not set, these elements will be seen in the hover labels. textangle Sets the angle of the tick labels with respect to the bar. For example, a `tickangle` of -90 draws the tick labels vertically. With "auto" the texts may automatically be rotated to fit with the maximum size in bars. textfont Sets the font used for `text`. textinfo Determines which trace information appear on the graph. In the case of having multiple waterfalls, totals are computed separately (per trace). textposition Specifies the location of the `text`. "inside" positions `text` inside, next to the bar end (rotated and scaled if needed). "outside" positions `text` outside, next to the bar end (scaled if needed), unless there is another bar stacked on this one, then the text gets pushed inside. "auto" tries to position `text` inside the bar, but if the bar is too small and no bar is stacked on this one the text is moved outside. If "none", no text appears. textpositionsrc Sets the source reference on Chart Studio Cloud for `textposition`. textsrc Sets the source reference on Chart Studio Cloud for `text`. texttemplate Template string used for rendering the information text that appear on points. Note that this will override `textinfo`. Variables are inserted using %{variable}, for example "y: %{y}". Numbers are formatted using d3-format's syntax %{variable:d3-format}, for example "Price: %{y:$.2f}". https://github.com/d3/d3-format/tree/v1.4.5#d3-format for details on the formatting syntax. Dates are formatted using d3-time-format's syntax %{variable|d3-time-format}, for example "Day: %{2019-01-01|%A}". https://github.com/d3/d3-time- format/tree/v2.2.3#locale_format for details on the date formatting syntax. Every attributes that can be specified per-point (the ones that are `arrayOk: true`) are available. Finally, the template string has access to variables `initial`, `delta`, `final` and `label`. texttemplatesrc Sets the source reference on Chart Studio Cloud for `texttemplate`. totals :class:`plotly.graph_objects.waterfall.Totals` instance or dict with compatible properties uid Assign an id to this trace, Use this to provide object constancy between traces during animations and transitions. uirevision Controls persistence of some user-driven changes to the trace: `constraintrange` in `parcoords` traces, as well as some `editable: true` modifications such as `name` and `colorbar.title`. Defaults to `layout.uirevision`. Note that other user-driven trace attribute changes are controlled by `layout` attributes: `trace.visible` is controlled by `layout.legend.uirevision`, `selectedpoints` is controlled by `layout.selectionrevision`, and `colorbar.(x|y)` (accessible with `config: {editable: true}`) is controlled by `layout.editrevision`. Trace changes are tracked by `uid`, which only falls back on trace index if no `uid` is provided. So if your app can add/remove traces before the end of the `data` array, such that the same trace has a different index, you can still preserve user-driven changes if you give each trace a `uid` that stays with it as it moves. visible Determines whether or not this trace is visible. If "legendonly", the trace is not drawn, but can appear as a legend item (provided that the legend itself is visible). width Sets the bar width (in position axis units). widthsrc Sets the source reference on Chart Studio Cloud for `width`. x Sets the x coordinates. x0 Alternate to `x`. Builds a linear space of x coordinates. Use with `dx` where `x0` is the starting coordinate and `dx` the step. xaxis Sets a reference between this trace's x coordinates and a 2D cartesian x axis. If "x" (the default value), the x coordinates refer to `layout.xaxis`. If "x2", the x coordinates refer to `layout.xaxis2`, and so on. xhoverformat Sets the hover text formatting rulefor `x` using d3 formatting mini-languages which are very similar to those in Python. For numbers, see: https://github.com/d3/d3-format/tree/v1.4.5#d3-format. And for dates see: https://github.com/d3/d3-time- format/tree/v2.2.3#locale_format. We add two items to d3's date formatter: "%h" for half of the year as a decimal number as well as "%{n}f" for fractional seconds with n digits. For example, *2016-10-13 09:15:23.456* with tickformat "%H~%M~%S.%2f" would display *09~15~23.46*By default the values are formatted using `xaxis.hoverformat`. xperiod Only relevant when the axis `type` is "date". Sets the period positioning in milliseconds or "M" on the x axis. Special values in the form of "M" could be used to declare the number of months. In this case `n` must be a positive integer. xperiod0 Only relevant when the axis `type` is "date". Sets the base for period positioning in milliseconds or date string on the x0 axis. When `x0period` is round number of weeks, the `x0period0` by default would be on a Sunday i.e. 2000-01-02, otherwise it would be at 2000-01-01. xperiodalignment Only relevant when the axis `type` is "date". Sets the alignment of data points on the x axis. xsrc Sets the source reference on Chart Studio Cloud for `x`. y Sets the y coordinates. y0 Alternate to `y`. Builds a linear space of y coordinates. Use with `dy` where `y0` is the starting coordinate and `dy` the step. yaxis Sets a reference between this trace's y coordinates and a 2D cartesian y axis. If "y" (the default value), the y coordinates refer to `layout.yaxis`. If "y2", the y coordinates refer to `layout.yaxis2`, and so on. yhoverformat Sets the hover text formatting rulefor `y` using d3 formatting mini-languages which are very similar to those in Python. For numbers, see: https://github.com/d3/d3-format/tree/v1.4.5#d3-format. And for dates see: https://github.com/d3/d3-time- format/tree/v2.2.3#locale_format. We add two items to d3's date formatter: "%h" for half of the year as a decimal number as well as "%{n}f" for fractional seconds with n digits. For example, *2016-10-13 09:15:23.456* with tickformat "%H~%M~%S.%2f" would display *09~15~23.46*By default the values are formatted using `yaxis.hoverformat`. yperiod Only relevant when the axis `type` is "date". Sets the period positioning in milliseconds or "M" on the y axis. Special values in the form of "M" could be used to declare the number of months. In this case `n` must be a positive integer. yperiod0 Only relevant when the axis `type` is "date". Sets the base for period positioning in milliseconds or date string on the y0 axis. When `y0period` is round number of weeks, the `y0period0` by default would be on a Sunday i.e. 2000-01-02, otherwise it would be at 2000-01-01. yperiodalignment Only relevant when the axis `type` is "date". Sets the alignment of data points on the y axis. ysrc Sets the source reference on Chart Studio Cloud for `y`. """ def __init__( self, arg=None, alignmentgroup=None, base=None, cliponaxis=None, connector=None, constraintext=None, customdata=None, customdatasrc=None, decreasing=None, dx=None, dy=None, hoverinfo=None, hoverinfosrc=None, hoverlabel=None, hovertemplate=None, hovertemplatesrc=None, hovertext=None, hovertextsrc=None, ids=None, idssrc=None, increasing=None, insidetextanchor=None, insidetextfont=None, legend=None, legendgroup=None, legendgrouptitle=None, legendrank=None, legendwidth=None, measure=None, measuresrc=None, meta=None, metasrc=None, name=None, offset=None, offsetgroup=None, offsetsrc=None, opacity=None, orientation=None, outsidetextfont=None, selectedpoints=None, showlegend=None, stream=None, text=None, textangle=None, textfont=None, textinfo=None, textposition=None, textpositionsrc=None, textsrc=None, texttemplate=None, texttemplatesrc=None, totals=None, uid=None, uirevision=None, visible=None, width=None, widthsrc=None, x=None, x0=None, xaxis=None, xhoverformat=None, xperiod=None, xperiod0=None, xperiodalignment=None, xsrc=None, y=None, y0=None, yaxis=None, yhoverformat=None, yperiod=None, yperiod0=None, yperiodalignment=None, ysrc=None, **kwargs, ): """ Construct a new Waterfall object Draws waterfall trace which is useful graph to displays the contribution of various elements (either positive or negative) in a bar chart. The data visualized by the span of the bars is set in `y` if `orientation` is set to "v" (the default) and the labels are set in `x`. By setting `orientation` to "h", the roles are interchanged. Parameters ---------- arg dict of properties compatible with this constructor or an instance of :class:`plotly.graph_objs.Waterfall` alignmentgroup Set several traces linked to the same position axis or matching axes to the same alignmentgroup. This controls whether bars compute their positional range dependently or independently. base Sets where the bar base is drawn (in position axis units). cliponaxis Determines whether the text nodes are clipped about the subplot axes. To show the text nodes above axis lines and tick labels, make sure to set `xaxis.layer` and `yaxis.layer` to *below traces*. connector :class:`plotly.graph_objects.waterfall.Connector` instance or dict with compatible properties constraintext Constrain the size of text inside or outside a bar to be no larger than the bar itself. customdata Assigns extra data each datum. This may be useful when listening to hover, click and selection events. Note that, "scatter" traces also appends customdata items in the markers DOM elements customdatasrc Sets the source reference on Chart Studio Cloud for `customdata`. decreasing :class:`plotly.graph_objects.waterfall.Decreasing` instance or dict with compatible properties dx Sets the x coordinate step. See `x0` for more info. dy Sets the y coordinate step. See `y0` for more info. hoverinfo Determines which trace information appear on hover. If `none` or `skip` are set, no information is displayed upon hovering. But, if `none` is set, click and hover events are still fired. hoverinfosrc Sets the source reference on Chart Studio Cloud for `hoverinfo`. hoverlabel :class:`plotly.graph_objects.waterfall.Hoverlabel` instance or dict with compatible properties hovertemplate Template string used for rendering the information that appear on hover box. Note that this will override `hoverinfo`. Variables are inserted using %{variable}, for example "y: %{y}" as well as %{xother}, {%_xother}, {%_xother_}, {%xother_}. When showing info for several points, "xother" will be added to those with different x positions from the first point. An underscore before or after "(x|y)other" will add a space on that side, only when this field is shown. Numbers are formatted using d3-format's syntax %{variable:d3-format}, for example "Price: %{y:$.2f}". https://github.com/d3/d3-format/tree/v1.4.5#d3-format for details on the formatting syntax. Dates are formatted using d3-time-format's syntax %{variable|d3-time-format}, for example "Day: %{2019-01-01|%A}". https://github.com/d3/d3-time- format/tree/v2.2.3#locale_format for details on the date formatting syntax. The variables available in `hovertemplate` are the ones emitted as event data described at this link https://plotly.com/javascript/plotlyjs-events/#event- data. Additionally, every attributes that can be specified per-point (the ones that are `arrayOk: true`) are available. Finally, the template string has access to variables `initial`, `delta` and `final`. Anything contained in tag `` is displayed in the secondary box, for example "{fullData.name}". To hide the secondary box completely, use an empty tag ``. hovertemplatesrc Sets the source reference on Chart Studio Cloud for `hovertemplate`. hovertext Sets hover text elements associated with each (x,y) pair. If a single string, the same string appears over all the data points. If an array of string, the items are mapped in order to the this trace's (x,y) coordinates. To be seen, trace `hoverinfo` must contain a "text" flag. hovertextsrc Sets the source reference on Chart Studio Cloud for `hovertext`. ids Assigns id labels to each datum. These ids for object constancy of data points during animation. Should be an array of strings, not numbers or any other type. idssrc Sets the source reference on Chart Studio Cloud for `ids`. increasing :class:`plotly.graph_objects.waterfall.Increasing` instance or dict with compatible properties insidetextanchor Determines if texts are kept at center or start/end points in `textposition` "inside" mode. insidetextfont Sets the font used for `text` lying inside the bar. legend Sets the reference to a legend to show this trace in. References to these legends are "legend", "legend2", "legend3", etc. Settings for these legends are set in the layout, under `layout.legend`, `layout.legend2`, etc. legendgroup Sets the legend group for this trace. Traces and shapes part of the same legend group hide/show at the same time when toggling legend items. legendgrouptitle :class:`plotly.graph_objects.waterfall.Legendgrouptitle ` instance or dict with compatible properties legendrank Sets the legend rank for this trace. Items and groups with smaller ranks are presented on top/left side while with "reversed" `legend.traceorder` they are on bottom/right side. The default legendrank is 1000, so that you can use ranks less than 1000 to place certain items before all unranked items, and ranks greater than 1000 to go after all unranked items. When having unranked or equal rank items shapes would be displayed after traces i.e. according to their order in data and layout. legendwidth Sets the width (in px or fraction) of the legend for this trace. measure An array containing types of values. By default the values are considered as 'relative'. However; it is possible to use 'total' to compute the sums. Also 'absolute' could be applied to reset the computed total or to declare an initial value where needed. measuresrc Sets the source reference on Chart Studio Cloud for `measure`. meta Assigns extra meta information associated with this trace that can be used in various text attributes. Attributes such as trace `name`, graph, axis and colorbar `title.text`, annotation `text` `rangeselector`, `updatemenues` and `sliders` `label` text all support `meta`. To access the trace `meta` values in an attribute in the same trace, simply use `%{meta[i]}` where `i` is the index or key of the `meta` item in question. To access trace `meta` in layout attributes, use `%{data[n[.meta[i]}` where `i` is the index or key of the `meta` and `n` is the trace index. metasrc Sets the source reference on Chart Studio Cloud for `meta`. name Sets the trace name. The trace name appears as the legend item and on hover. offset Shifts the position where the bar is drawn (in position axis units). In "group" barmode, traces that set "offset" will be excluded and drawn in "overlay" mode instead. offsetgroup Set several traces linked to the same position axis or matching axes to the same offsetgroup where bars of the same position coordinate will line up. offsetsrc Sets the source reference on Chart Studio Cloud for `offset`. opacity Sets the opacity of the trace. orientation Sets the orientation of the bars. With "v" ("h"), the value of the each bar spans along the vertical (horizontal). outsidetextfont Sets the font used for `text` lying outside the bar. selectedpoints Array containing integer indices of selected points. Has an effect only for traces that support selections. Note that an empty array means an empty selection where the `unselected` are turned on for all points, whereas, any other non-array values means no selection all where the `selected` and `unselected` styles have no effect. showlegend Determines whether or not an item corresponding to this trace is shown in the legend. stream :class:`plotly.graph_objects.waterfall.Stream` instance or dict with compatible properties text Sets text elements associated with each (x,y) pair. If a single string, the same string appears over all the data points. If an array of string, the items are mapped in order to the this trace's (x,y) coordinates. If trace `hoverinfo` contains a "text" flag and "hovertext" is not set, these elements will be seen in the hover labels. textangle Sets the angle of the tick labels with respect to the bar. For example, a `tickangle` of -90 draws the tick labels vertically. With "auto" the texts may automatically be rotated to fit with the maximum size in bars. textfont Sets the font used for `text`. textinfo Determines which trace information appear on the graph. In the case of having multiple waterfalls, totals are computed separately (per trace). textposition Specifies the location of the `text`. "inside" positions `text` inside, next to the bar end (rotated and scaled if needed). "outside" positions `text` outside, next to the bar end (scaled if needed), unless there is another bar stacked on this one, then the text gets pushed inside. "auto" tries to position `text` inside the bar, but if the bar is too small and no bar is stacked on this one the text is moved outside. If "none", no text appears. textpositionsrc Sets the source reference on Chart Studio Cloud for `textposition`. textsrc Sets the source reference on Chart Studio Cloud for `text`. texttemplate Template string used for rendering the information text that appear on points. Note that this will override `textinfo`. Variables are inserted using %{variable}, for example "y: %{y}". Numbers are formatted using d3-format's syntax %{variable:d3-format}, for example "Price: %{y:$.2f}". https://github.com/d3/d3-format/tree/v1.4.5#d3-format for details on the formatting syntax. Dates are formatted using d3-time-format's syntax %{variable|d3-time-format}, for example "Day: %{2019-01-01|%A}". https://github.com/d3/d3-time- format/tree/v2.2.3#locale_format for details on the date formatting syntax. Every attributes that can be specified per-point (the ones that are `arrayOk: true`) are available. Finally, the template string has access to variables `initial`, `delta`, `final` and `label`. texttemplatesrc Sets the source reference on Chart Studio Cloud for `texttemplate`. totals :class:`plotly.graph_objects.waterfall.Totals` instance or dict with compatible properties uid Assign an id to this trace, Use this to provide object constancy between traces during animations and transitions. uirevision Controls persistence of some user-driven changes to the trace: `constraintrange` in `parcoords` traces, as well as some `editable: true` modifications such as `name` and `colorbar.title`. Defaults to `layout.uirevision`. Note that other user-driven trace attribute changes are controlled by `layout` attributes: `trace.visible` is controlled by `layout.legend.uirevision`, `selectedpoints` is controlled by `layout.selectionrevision`, and `colorbar.(x|y)` (accessible with `config: {editable: true}`) is controlled by `layout.editrevision`. Trace changes are tracked by `uid`, which only falls back on trace index if no `uid` is provided. So if your app can add/remove traces before the end of the `data` array, such that the same trace has a different index, you can still preserve user-driven changes if you give each trace a `uid` that stays with it as it moves. visible Determines whether or not this trace is visible. If "legendonly", the trace is not drawn, but can appear as a legend item (provided that the legend itself is visible). width Sets the bar width (in position axis units). widthsrc Sets the source reference on Chart Studio Cloud for `width`. x Sets the x coordinates. x0 Alternate to `x`. Builds a linear space of x coordinates. Use with `dx` where `x0` is the starting coordinate and `dx` the step. xaxis Sets a reference between this trace's x coordinates and a 2D cartesian x axis. If "x" (the default value), the x coordinates refer to `layout.xaxis`. If "x2", the x coordinates refer to `layout.xaxis2`, and so on. xhoverformat Sets the hover text formatting rulefor `x` using d3 formatting mini-languages which are very similar to those in Python. For numbers, see: https://github.com/d3/d3-format/tree/v1.4.5#d3-format. And for dates see: https://github.com/d3/d3-time- format/tree/v2.2.3#locale_format. We add two items to d3's date formatter: "%h" for half of the year as a decimal number as well as "%{n}f" for fractional seconds with n digits. For example, *2016-10-13 09:15:23.456* with tickformat "%H~%M~%S.%2f" would display *09~15~23.46*By default the values are formatted using `xaxis.hoverformat`. xperiod Only relevant when the axis `type` is "date". Sets the period positioning in milliseconds or "M" on the x axis. Special values in the form of "M" could be used to declare the number of months. In this case `n` must be a positive integer. xperiod0 Only relevant when the axis `type` is "date". Sets the base for period positioning in milliseconds or date string on the x0 axis. When `x0period` is round number of weeks, the `x0period0` by default would be on a Sunday i.e. 2000-01-02, otherwise it would be at 2000-01-01. xperiodalignment Only relevant when the axis `type` is "date". Sets the alignment of data points on the x axis. xsrc Sets the source reference on Chart Studio Cloud for `x`. y Sets the y coordinates. y0 Alternate to `y`. Builds a linear space of y coordinates. Use with `dy` where `y0` is the starting coordinate and `dy` the step. yaxis Sets a reference between this trace's y coordinates and a 2D cartesian y axis. If "y" (the default value), the y coordinates refer to `layout.yaxis`. If "y2", the y coordinates refer to `layout.yaxis2`, and so on. yhoverformat Sets the hover text formatting rulefor `y` using d3 formatting mini-languages which are very similar to those in Python. For numbers, see: https://github.com/d3/d3-format/tree/v1.4.5#d3-format. And for dates see: https://github.com/d3/d3-time- format/tree/v2.2.3#locale_format. We add two items to d3's date formatter: "%h" for half of the year as a decimal number as well as "%{n}f" for fractional seconds with n digits. For example, *2016-10-13 09:15:23.456* with tickformat "%H~%M~%S.%2f" would display *09~15~23.46*By default the values are formatted using `yaxis.hoverformat`. yperiod Only relevant when the axis `type` is "date". Sets the period positioning in milliseconds or "M" on the y axis. Special values in the form of "M" could be used to declare the number of months. In this case `n` must be a positive integer. yperiod0 Only relevant when the axis `type` is "date". Sets the base for period positioning in milliseconds or date string on the y0 axis. When `y0period` is round number of weeks, the `y0period0` by default would be on a Sunday i.e. 2000-01-02, otherwise it would be at 2000-01-01. yperiodalignment Only relevant when the axis `type` is "date". Sets the alignment of data points on the y axis. ysrc Sets the source reference on Chart Studio Cloud for `y`. Returns ------- Waterfall """ super(Waterfall, self).__init__("waterfall") if "_parent" in kwargs: self._parent = kwargs["_parent"] return # Validate arg # ------------ if arg is None: arg = {} elif isinstance(arg, self.__class__): arg = arg.to_plotly_json() elif isinstance(arg, dict): arg = _copy.copy(arg) else: raise ValueError( """\ The first argument to the plotly.graph_objs.Waterfall constructor must be a dict or an instance of :class:`plotly.graph_objs.Waterfall`""" ) # Handle skip_invalid # ------------------- self._skip_invalid = kwargs.pop("skip_invalid", False) self._validate = kwargs.pop("_validate", True) # Populate data dict with properties # ---------------------------------- _v = arg.pop("alignmentgroup", None) _v = alignmentgroup if alignmentgroup is not None else _v if _v is not None: self["alignmentgroup"] = _v _v = arg.pop("base", None) _v = base if base is not None else _v if _v is not None: self["base"] = _v _v = arg.pop("cliponaxis", None) _v = cliponaxis if cliponaxis is not None else _v if _v is not None: self["cliponaxis"] = _v _v = arg.pop("connector", None) _v = connector if connector is not None else _v if _v is not None: self["connector"] = _v _v = arg.pop("constraintext", None) _v = constraintext if constraintext is not None else _v if _v is not None: self["constraintext"] = _v _v = arg.pop("customdata", None) _v = customdata if customdata is not None else _v if _v is not None: self["customdata"] = _v _v = arg.pop("customdatasrc", None) _v = customdatasrc if customdatasrc is not None else _v if _v is not None: self["customdatasrc"] = _v _v = arg.pop("decreasing", None) _v = decreasing if decreasing is not None else _v if _v is not None: self["decreasing"] = _v _v = arg.pop("dx", None) _v = dx if dx is not None else _v if _v is not None: self["dx"] = _v _v = arg.pop("dy", None) _v = dy if dy is not None else _v if _v is not None: self["dy"] = _v _v = arg.pop("hoverinfo", None) _v = hoverinfo if hoverinfo is not None else _v if _v is not None: self["hoverinfo"] = _v _v = arg.pop("hoverinfosrc", None) _v = hoverinfosrc if hoverinfosrc is not None else _v if _v is not None: self["hoverinfosrc"] = _v _v = arg.pop("hoverlabel", None) _v = hoverlabel if hoverlabel is not None else _v if _v is not None: self["hoverlabel"] = _v _v = arg.pop("hovertemplate", None) _v = hovertemplate if hovertemplate is not None else _v if _v is not None: self["hovertemplate"] = _v _v = arg.pop("hovertemplatesrc", None) _v = hovertemplatesrc if hovertemplatesrc is not None else _v if _v is not None: self["hovertemplatesrc"] = _v _v = arg.pop("hovertext", None) _v = hovertext if hovertext is not None else _v if _v is not None: self["hovertext"] = _v _v = arg.pop("hovertextsrc", None) _v = hovertextsrc if hovertextsrc is not None else _v if _v is not None: self["hovertextsrc"] = _v _v = arg.pop("ids", None) _v = ids if ids is not None else _v if _v is not None: self["ids"] = _v _v = arg.pop("idssrc", None) _v = idssrc if idssrc is not None else _v if _v is not None: self["idssrc"] = _v _v = arg.pop("increasing", None) _v = increasing if increasing is not None else _v if _v is not None: self["increasing"] = _v _v = arg.pop("insidetextanchor", None) _v = insidetextanchor if insidetextanchor is not None else _v if _v is not None: self["insidetextanchor"] = _v _v = arg.pop("insidetextfont", None) _v = insidetextfont if insidetextfont is not None else _v if _v is not None: self["insidetextfont"] = _v _v = arg.pop("legend", None) _v = legend if legend is not None else _v if _v is not None: self["legend"] = _v _v = arg.pop("legendgroup", None) _v = legendgroup if legendgroup is not None else _v if _v is not None: self["legendgroup"] = _v _v = arg.pop("legendgrouptitle", None) _v = legendgrouptitle if legendgrouptitle is not None else _v if _v is not None: self["legendgrouptitle"] = _v _v = arg.pop("legendrank", None) _v = legendrank if legendrank is not None else _v if _v is not None: self["legendrank"] = _v _v = arg.pop("legendwidth", None) _v = legendwidth if legendwidth is not None else _v if _v is not None: self["legendwidth"] = _v _v = arg.pop("measure", None) _v = measure if measure is not None else _v if _v is not None: self["measure"] = _v _v = arg.pop("measuresrc", None) _v = measuresrc if measuresrc is not None else _v if _v is not None: self["measuresrc"] = _v _v = arg.pop("meta", None) _v = meta if meta is not None else _v if _v is not None: self["meta"] = _v _v = arg.pop("metasrc", None) _v = metasrc if metasrc is not None else _v if _v is not None: self["metasrc"] = _v _v = arg.pop("name", None) _v = name if name is not None else _v if _v is not None: self["name"] = _v _v = arg.pop("offset", None) _v = offset if offset is not None else _v if _v is not None: self["offset"] = _v _v = arg.pop("offsetgroup", None) _v = offsetgroup if offsetgroup is not None else _v if _v is not None: self["offsetgroup"] = _v _v = arg.pop("offsetsrc", None) _v = offsetsrc if offsetsrc is not None else _v if _v is not None: self["offsetsrc"] = _v _v = arg.pop("opacity", None) _v = opacity if opacity is not None else _v if _v is not None: self["opacity"] = _v _v = arg.pop("orientation", None) _v = orientation if orientation is not None else _v if _v is not None: self["orientation"] = _v _v = arg.pop("outsidetextfont", None) _v = outsidetextfont if outsidetextfont is not None else _v if _v is not None: self["outsidetextfont"] = _v _v = arg.pop("selectedpoints", None) _v = selectedpoints if selectedpoints is not None else _v if _v is not None: self["selectedpoints"] = _v _v = arg.pop("showlegend", None) _v = showlegend if showlegend is not None else _v if _v is not None: self["showlegend"] = _v _v = arg.pop("stream", None) _v = stream if stream is not None else _v if _v is not None: self["stream"] = _v _v = arg.pop("text", None) _v = text if text is not None else _v if _v is not None: self["text"] = _v _v = arg.pop("textangle", None) _v = textangle if textangle is not None else _v if _v is not None: self["textangle"] = _v _v = arg.pop("textfont", None) _v = textfont if textfont is not None else _v if _v is not None: self["textfont"] = _v _v = arg.pop("textinfo", None) _v = textinfo if textinfo is not None else _v if _v is not None: self["textinfo"] = _v _v = arg.pop("textposition", None) _v = textposition if textposition is not None else _v if _v is not None: self["textposition"] = _v _v = arg.pop("textpositionsrc", None) _v = textpositionsrc if textpositionsrc is not None else _v if _v is not None: self["textpositionsrc"] = _v _v = arg.pop("textsrc", None) _v = textsrc if textsrc is not None else _v if _v is not None: self["textsrc"] = _v _v = arg.pop("texttemplate", None) _v = texttemplate if texttemplate is not None else _v if _v is not None: self["texttemplate"] = _v _v = arg.pop("texttemplatesrc", None) _v = texttemplatesrc if texttemplatesrc is not None else _v if _v is not None: self["texttemplatesrc"] = _v _v = arg.pop("totals", None) _v = totals if totals is not None else _v if _v is not None: self["totals"] = _v _v = arg.pop("uid", None) _v = uid if uid is not None else _v if _v is not None: self["uid"] = _v _v = arg.pop("uirevision", None) _v = uirevision if uirevision is not None else _v if _v is not None: self["uirevision"] = _v _v = arg.pop("visible", None) _v = visible if visible is not None else _v if _v is not None: self["visible"] = _v _v = arg.pop("width", None) _v = width if width is not None else _v if _v is not None: self["width"] = _v _v = arg.pop("widthsrc", None) _v = widthsrc if widthsrc is not None else _v if _v is not None: self["widthsrc"] = _v _v = arg.pop("x", None) _v = x if x is not None else _v if _v is not None: self["x"] = _v _v = arg.pop("x0", None) _v = x0 if x0 is not None else _v if _v is not None: self["x0"] = _v _v = arg.pop("xaxis", None) _v = xaxis if xaxis is not None else _v if _v is not None: self["xaxis"] = _v _v = arg.pop("xhoverformat", None) _v = xhoverformat if xhoverformat is not None else _v if _v is not None: self["xhoverformat"] = _v _v = arg.pop("xperiod", None) _v = xperiod if xperiod is not None else _v if _v is not None: self["xperiod"] = _v _v = arg.pop("xperiod0", None) _v = xperiod0 if xperiod0 is not None else _v if _v is not None: self["xperiod0"] = _v _v = arg.pop("xperiodalignment", None) _v = xperiodalignment if xperiodalignment is not None else _v if _v is not None: self["xperiodalignment"] = _v _v = arg.pop("xsrc", None) _v = xsrc if xsrc is not None else _v if _v is not None: self["xsrc"] = _v _v = arg.pop("y", None) _v = y if y is not None else _v if _v is not None: self["y"] = _v _v = arg.pop("y0", None) _v = y0 if y0 is not None else _v if _v is not None: self["y0"] = _v _v = arg.pop("yaxis", None) _v = yaxis if yaxis is not None else _v if _v is not None: self["yaxis"] = _v _v = arg.pop("yhoverformat", None) _v = yhoverformat if yhoverformat is not None else _v if _v is not None: self["yhoverformat"] = _v _v = arg.pop("yperiod", None) _v = yperiod if yperiod is not None else _v if _v is not None: self["yperiod"] = _v _v = arg.pop("yperiod0", None) _v = yperiod0 if yperiod0 is not None else _v if _v is not None: self["yperiod0"] = _v _v = arg.pop("yperiodalignment", None) _v = yperiodalignment if yperiodalignment is not None else _v if _v is not None: self["yperiodalignment"] = _v _v = arg.pop("ysrc", None) _v = ysrc if ysrc is not None else _v if _v is not None: self["ysrc"] = _v # Read-only literals # ------------------ self._props["type"] = "waterfall" arg.pop("type", None) # Process unknown kwargs # ---------------------- self._process_kwargs(**dict(arg, **kwargs)) # Reset skip_invalid # ------------------ self._skip_invalid = False